DataSheet26.com

FH23-17S-0.3SHAW PDF даташит

Спецификация FH23-17S-0.3SHAW изготовлена ​​​​«Hirose Electric» и имеет функцию, называемую «0.3mm Contact Pitch/ 1.25mm above the board/ Flexible Printed Circuit Connectors».

Детали детали

Номер произв FH23-17S-0.3SHAW
Описание 0.3mm Contact Pitch/ 1.25mm above the board/ Flexible Printed Circuit Connectors
Производители Hirose Electric
логотип Hirose Electric логотип 

10 Pages
scroll

No Preview Available !

FH23-17S-0.3SHAW Даташит, Описание, Даташиты
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
FH 23 Series
qStaggered termination configuration. Only 1.25 mm above the board.
Leadless type
Completely enclosed
bottom surface
Lead type
sFeatures
1. FPC low insertion force and high holding force
Hirose Electric's unique low insertion force (LIF) design
(patents pending) improves the Flexible Printed Circuit
(FPC) holding force after insertion.
FPC insertion force:Reduced approximately 36%
(as compared with FH18 Series connectors).
FPC holding force:Improvement of approximately 22%
(as compared with FH18 Series connectors).
2. Temporary hold of FPC
There is no need to hold the FPC after insertion in the
connector. The connector will hold it in correct position,
allowing closing of the actuator.
3. Easy board mounting
The surface mounted termination of the contacts is staggered on
0.6 mm centers, positioned on front and back of the connector.
Bottom of the connector is completely insulated, allowing
conductive traces on PCB to run under the connector.
4. Proven Flip-lock Actuator assures easy and
reliable operation
Rotating actuator permits easy insertion and reliable connection
with the FPC. Tactile sensation confirms complete mechanical
locking of the actuator and the electrical connection.
5. Variations to suit different mounting areas
Available with lead and leadless type of terminations
(for opposing FPC insertion side).
6. Designed for placement with automatic equipment
Flat top surface allows pick-up with vacuum nozzles.
Packaged in embossed tape, on reel. One reel contains 2,500 pieces.
7. Accepts 0.2mm thick FPC
8. Variety of contact positions
Available with 15,17,21,23,25,27,31,33,39,45,51,61and 71 pos.
8. Environmental considerations
Plating is lead-free in order to protect environment.
sApplications
Mobile phones, PDA’s, digital cameras, digital video
cameras and other compact devices requiring
interconnections of the main circuit with the LCD,
plasma display (PDP), camera module, or other devices.
1.25mm
When the actuator is opened
Temporary hold of FPC
When the actuator is closed
2004.6
1









No Preview Available !

FH23-17S-0.3SHAW Даташит, Описание, Даташиты
sProduct Specifications
Ratings
Current rating 0.3 A DC
Voltage rating 30 V AC
Operating temperature range
Storage temperature range
-55 ç to +85ç (Note 1)
-10ç to +50ç (Note 2)
Operating humidity range
Storage humidity range
Relative humidity 90% max. (No condensation) Relative humidity 90% max.
Recommended FPC
Thickness: = 0.2±0.03mm Tin-lead plating (Note 3)
Item Specification
1. Insulation resistance 50 M ohms min.
2. Withstanding voltage No flashover or insulation breakdown
3. Contact resistance
100 m ohms max.
*Including FPC/FFC conductor resistance
100 V DC
90 V AC/one minute
1 mA AC
Conditions
4. Durability
Contact resistance: 100 m ohms max.
4. (insertion/ withdrawal) No damage, cracks, or parts dislocation.
10 cycles
5. Vibration
No electrical discontinuity of 1 µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles,
3 axis.
6. Shock
No electrical discontinuity of 1 µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s2, 6ms duration, sine half-wave
waveform, 3 cycles, 3 axis.
7. Humidity
(Steady state)
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts dislocation.
96 hours at temperature of 40°C and humidity of 90% to 95%
Contact resistance: 100 m ohms max.
8. Temperature cycle Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
Temperature:-55ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time: 30/ 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
9. Resistance to
soldering heat
No deformation of
components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 350 ç±5 ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating
Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,
shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
sMaterials
Part
Insulator
Contacts
Material
LCP
LCP
Phosphor bronze
Finish
Color:Beige
Color:Black
Tin-lead plating (Note 3)
Remarks
UL94V-0
---------------
sOrdering information
FH23 - 39S - 0.3 SHW (05)
1
2
34
5
1 Series name : FH23
2 No. of contacts.
Number of contacts : 15,17,21,23,25,27,31,33,39,45,51,61,71
3 Contact pitch: 0.3 mm
4 Terminal type
SHW: SMT horizontal mounting type, lead type termination.
SHAW: SMT horizontal mounting type, lead-less type termination.
5 Plating specifications :
(05)
(51)
: Gold plating
: Tin-lead plating
2









No Preview Available !

FH23-17S-0.3SHAW Даташит, Описание, Даташиты
BConnector Dimensions (Lead Type termination)
0.3
0.6
A
B
1.7
(0.15)
0.6
Number of contacts indicator
(0.12)
C
(D: FPC insertion area dimensions)
0.05MAX.
0.1MAX.
0.55
12
E
4.15
0.05MAX.
0.1MAX.
0.5
1
2
Notes 1 The coplanarity of each terminal lead is within 0.1.
2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Lead Type
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH23-15S-0.3SHW(51)
586-1317-0-51
15
17.0 13.6 14.2 14.83
FH23-17S-0.3SHW(51)
586-1300-7-51
17
17.6 14.2 14.8 15.43
FH23-21S-0.3SHW(51)
586-1314-1-51
21
18.8 15.4 16.0 16.63
FH23-23S-0.3SHW(51)
586-1324-5-51
23
19.4 16.0 16.6 17.23
FH23-25S-0.3SHW(51)
586-1322-0-51
25
10.0 16.6 17.2 17.83
FH23-27S-0.3SHW(51)
586-1308-9-51
27
10.6 17.2 17.8 18.43
FH23-31S-0.3SHW(51)
586-1302-2-51
31
11.8 18.4 19.0 19.63
FH23-33S-0.3SHW(51)
586-1304-8-51
33
12.4 19.0 19.6 10.23
FH23-39S-0.3SHW(51)
586-1306-3-51
39
14.2 10.8 11.4 12.03
FH23-45S-0.3SHW(51)
586-1318-2-51
45
16.0 12.6 13.2 13.83
FH23-51S-0.3SHW(51)
586-1312-6-51
51
17.8 14.4 15.0 15.63
FH23-61S-0.3SHW(51)
586-1310-0-51
61
20.8 17.4 18.0 18.63
FH23-71S-0.3SHW(51)
586-1320-4-51
71
23.8 20.4 21.0 21.63
Note: Embossed tape reel packaging(2,500 pieces/reel)
Order by number of reels.
3










Скачать PDF:

[ FH23-17S-0.3SHAW.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
FH23-17S-0.3SHAW0.3mm Contact Pitch/ 1.25mm above the board/ Flexible Printed Circuit ConnectorsHirose Electric
Hirose Electric

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск