DataSheet26.com

AS8202 PDF даташит

Спецификация AS8202 изготовлена ​​​​«austriamicrosystems AG» и имеет функцию, называемую «TTP/C-C2 Communication Controller».

Детали детали

Номер произв AS8202
Описание TTP/C-C2 Communication Controller
Производители austriamicrosystems AG
логотип austriamicrosystems AG логотип 

10 Pages
scroll

No Preview Available !

AS8202 Даташит, Описание, Даташиты
AS8202
TTP/C-C2 Communication
Controller
Preliminary Data Sheet
Rev. 1.0, October 2000









No Preview Available !

AS8202 Даташит, Описание, Даташиты
TTP/C-C2 Communication Controller – Preliminary Data Sheet
AS8202
Key Features
Dedicated controller supporting TTP/C (time triggered protocol class C)
Suited for dependable distributed real-time systems with guaranteed response time
Application fields: Automotive (by-wire braking, steering, vehicle dynamics control, drive
train control), Aerospace (aircraft electronic systems), Industrial systems, Railway systems
TTP/C asynchronous data rate up to 5 MBit/s @ clock 40 MHz, synchronous data rate 25
MBit/s @ clock 40 MHz
Single power supply 3.3V
0.35µm CMOS process
Temperature range: -40°C to 125° C
2k x 16 RAM message, status and control area (communication network interface)
RAM for instruction code and configuration data
16 Bit non-multiplexed host CPU interface
16 Bit RISC architecture
16k x 16 internal FLASH memory for firmware and scheduling information
software tools, design-in support, development boards available ( http://www.tttech.com)
80 pin TQFP Package
General Description
The AS8202 communications controller is an integrated device supporting serial
communication according to the TTP/C specification. It performs all communications tasks such
as reception and transmission of messages in a TTP® cluster without interaction of the host
CPU.
TTP® provides mechanisms that allow the deployment in high-dependability distributed real-
time systems. It provides following services:
predictable transmission of messages with minimal jitter
fault-tolerant distributed clock synchronisation
consistent membership service with small delay
masking of single faults
Host
Processor
Interface
Quartz or
Oscillator
ram_data[15:0]
ram_address[11:0]
ram_ceb
ram_oeb
ram_web
ram_readyb
time_signalb
led[0]/time_tick
led[1]/time_overflow
led[2]/microtick
xin0
xout0
resetb
plloff
Controller
network
interface
(CNI)
TTP/C
protocol
processor core
Reset &
Time
base
Receiver
Bus
guardian
Transmitter
rxd[1:0]
rxclk[1:0]
rxdv[1:0]
rxer[1:0]
xin1
xout1
txd[1:0]
cts[1:0]
txclk[1:0]
TTP/C
Bus -
Media
Drivers
FLASH
memory
Instruction
RAM memory
Network
configuration
memory
(MEDL)
test_se
ftest
stest
fidis
mtest
Test
Inter-
face
Figure 1 AS8202 Block Diagram
Rev. 1.0, October 2000
Page 2 of 2









No Preview Available !

AS8202 Даташит, Описание, Даташиты
TTP/C-C2 Communication Controller – Preliminary Data Sheet
AS8202
The CNI (communication network interface) forms a temporal firewall. It decouples the
controller network from the host subsystem by use of a dual ported RAM. This prevents the
propagation of control errors. The interface to the host CPU is implemented as 16 bit wide non-
multiplexed asynchronous bus interface.
TTP/C follows a conflict-free media access strategy called time-division-multiple access
(TDMA). This means, TTP/C deploys a time slot technique based on a global time which is
permanently synchronised. Each node is assigned a time slot in which it is allowed to perform
transmit operation. The sequence of time slots is called TDMA round, a set of TDMA rounds
forms a cluster cycle. After one cluster cycle the operation of the network repeats. The
sequence of interactions forming the cluster cycle is defined in a static time schedule, called
message-descriptor-list (MEDL). The definition of the MEDL in conjunction with the global time
determines the response time for a service request.
The membership of all nodes in the network is evaluated by the communication controller. This
information is presented in a consistent fashion to all correct cluster members. During
operation, the status of every other node is propagated within one TDMA round. The MEDL is
loaded into the configuration memory when the system starts up.
Package and Pin Assignment
Type: TQFP 80, plastic package
60
61
Vdd
Vss
ram-data[8]
ram-data[9]
ram-data[10]
ram-data[11]
ram-data[12]
ram-data[13]
ram-data[14]
ram-data[15]
Vdd
Vss
ram-ceb
ram-oeb
ram-web
ram-readyb
to Vss
to Vdd
n.c.
n.c.
80
1
AS8202
TTP/C
Communications
Controller
(TOP VIEW)
41
40
ram-address[2]
ram-address[1]
ram-address[0]
mtest
led[2]/time-overflow
led[1]/time-tick
led[0]/microtick
Vss
Vdd
time-signalb
resetb
fidis
ftest
plloff
stest
test-se
Vss
xin1
xout1
Vdd
21
20
Figure 2 TQFP 80 pin package and pin assignment
Rev. 1.0, October 2000
Page 3 of 3










Скачать PDF:

[ AS8202.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
AS8201TTP/C-C1 Communications Controlleraustriamicrosystems AG
austriamicrosystems AG
AS8202TTP/C-C2 Communication Controlleraustriamicrosystems AG
austriamicrosystems AG
AS8202BTTP-C2NF Communication Controllerams
ams
AS8202NFTTP-C2NF Communication Controlleraustriamicrosystems AG
austriamicrosystems AG

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск