|
|
PDF AD544 Data sheet ( Hoja de datos )
| Número de pieza | AD544 | |
| Descripción | High Performance/ BiFET Operational Amplifiers | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AD544 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
a
FEATURES
Ultralow Drift: 1 V/؇C (AD547L)
Low Offset Voltage: 0.25 mV (AD547L)
Low Input Bias Currents: 25 pA max
Low Quiescent Current: 1.5 mA
Low Noise: 2 V p-p
High Open Loop Gain: 110 dB
High Slew Rate: 13 V/s
Fast Settling to ؎0.01%: 3 s
Low Total Harmonic Distortion: 0.0025%
Available in Hermetic Metal Can and Die Form
MIL-STD-883B Versions Available
Dual Versions Available: AD642, AD644, AD647
High Performance,
BiFET Operational Amplifiers
AD542/AD544/AD547
CONNECTION DIAGRAM
TAB
8
NULL 1
7 +V
INVERTING 2
INPUT
6 OUTPUT
NONINVERTING 3
5 NULL
INPUT
4
–V
NOTE: PIN 4 CONNECTED TO CASE
PRODUCT DESCRIPTION
The BiFET series of precision, monolithic FET-input op amps
are fabricated with the most advanced BiFET and laser trim-
ming technologies. The AD542, AD544, AD547 series offers
bias currents significantly lower than currently available BiFET
devices, 25 pA max, warmed up.
In addition, the offset voltage is laser trimmed to less than
0.25www.DataSheet4U.com mV on the AD547L, which is achieved by utilizing Analog
Devices’ exclusive laser wafer trimming (LWT) process. When
combined with the AD547’s low offset drift (1 µV/°C), these
features offer the user performance superior to existing BiFET
op amps at low BiFET pricing.
The AD542 or AD547 is recommended for any operational am-
plifier application requiring excellent dc performance at low to
moderate cost. Precision instrument front ends requiring accu-
rate amplification of millivolt level signals from megohm source
impedances will benefit from the device’s excellent combination
of low offset voltage and drift, low bias current and low 1/f
noise. High common-mode rejection (80 dB, min on the “K”
and “L” grades) and high open-loop gain, even under heavy
loading, ensures better than “12-bit” linearity in high imped-
ance buffer applications.
The AD544 is recommended for any op amp applications re-
quiring excellent ac and dc performance at low cost. The
2 MHz bandwidth and low offset of the AD544 make it the first
choice as an output amplifier for current output D/A converters,
such as the AD7541, 12-bit CMOS DAC.
Devices in this series are available in four grades: the “J,” “K,”
and “L” grades are specified over the 0°C to +70°C temperature
range and the “S” grade over the –55°C to +125°C operating
temperature range. All devices are offered in the hermetically
sealed, TO-99 metal can package.
PRODUCT HIGHLIGHTS
1. Improved bipolar and JFET processing results in the lowest
bias current available in a monolithic FET op amp.
2. Analog Devices, unlike some manufacturers, specifies each
device for the maximum bias current at either input in the
warmed-up condition, thus assuring the user that the device
will meet its published specifications in actual use.
3. Advanced laser wafer trimming techniques reduce offset volt-
age drift to 1 µV/°C max and offset voltage to only 0.25 mV
max on the AD547L.
4. Low voltage noise (2 µV p-p) and low offset voltage drift en-
hance performance as a precision op amp.
5. High slew rate (13 V/µs) and fast settling time to 0.01% (3 µs)
make the AD544 ideal for D/A, A/D, sample-hold circuits
and high speed integrators.
6. Low harmonic distortion (0.0025%) make the AD544 an
ideal choice in audio applications.
7. Bare die are available for use in hybrid circuit applications.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703
1 page  
AD542/AD544/AD547
Figure 10. Open Loop Voltage
Gain vs. Supply Voltage
Figure 11. Power Supply Rejection
vs. Frequency
Figure 12. Common-Mode Rejection
Ratio vs. Frequency
Figure 13. Quiescent Current vs.
Supply Voltage
Figure 14. Large Signal Frequency
Response
Figure 15. AD544 Output Swing and
Error vs. Settling Time
Figure 16. AD544 Total Harmonic
Distortion vs. Frequency
Figure 17. Input Noise Voltage
Spectral Density
Figure 18. Total RMS Noise vs.
Source Resistance
REV. B
–5–
5 Page 
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
TO-99 (H-08A)
AD542/AD544/AD547
REV. B
–11–
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet AD544.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AD5405 | Dual 12-Bit/ High Bandwidth/ Multiplying DAC with 4-Quadrant Resistors and Parallel Interface | Analog Devices |
| AD5410 | Current Source DAC | Analog Devices |
| AD5412 | (AD5412 / AD5422) Current Source & Voltage Output DAC | Analog Devices |
| AD5415 | (AD5424 - AD5547) High Bandwidth Multiplying DACs | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |