|
|
Número de pieza | 1KSMB36 | |
Descripción | 1000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR | |
Fabricantes | Littelfuse | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 1KSMB36 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
No Preview Available ! 1KSMBJ series
1000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
The 1KSMBJ range of surface mount protectors utilises the proven glass passivated technology used in
many of Littelfuse products portfolio. Rated at 1000 watts (10 x 1000 µs double exponential
waveform), the 1KSMBJ bridges the gap left by traditional types rated at 600 watts and 1500 watts,
suiting many applications where both power handling and size are paramount. The extremely fast
turn-on time, (less than one pico second), coupled with the low clamping factor and low on-state
impedance make this range ideal for the protection of today’s circuits. Our specially selected range of
voltages has been chosen to fulfill optimum protection for use in automotive and telecom
applications.
2.16
2.74
2.16
FEATURES
G Available in breakdown voltages from 6.8v. to 43v;
specially designed for automotive applications
G Response time: 1x10-12secs (theoretical)
G Glass passivated junction
G Offers high-surge rating in compact package: bridges the
gap between 600W and 1.5KW
G Forward surge rating:
100A 8.3ms single half sine wave
G 100% tested
G Operating temperature: -55°C to +150°C
MECHANICAL CHARACTERISTICS
G Case: DO214AA Outline moulded plastic over glass
passivated junction. UL 94 V-0 rated
G Terminals: Solderable to MIL-STD-750 Method 2026
G Solderable leads: 23°C for 10 seconds
G Marking: Cathode band, device code logo
G Weight: 0.093 grammes (approx)
G Supplied on reels of 3000 pieces. Tape width 12mm
Follows requirements of EIA 481-1
2.26
Solder Pads
All dimensions in mm
2.0 3.30-3.94
ELECTRICAL SPECIFICATION @ Tamb 25°C
Part
Number
1KSMB6.8
1KSMB15
1KSMB18
1KSMB27
1KSMB30
1KSMB36
Reverse
Stand Off
Voltage
VR
(Volts)
5.5
12.1
15.3
23.1
25.6
30.8
Breakdown
Voltage
VBR (Volts) @ IT
MIN
6.1
13.5
16.2
25.7
27.0
32.4
MAX
7.5
16.5
19.8
28.4
33.0
39.6
(mA)
10.0
1.0
1.0
1.0
1.0
1.0
Note: Clamping voltage is measured using 10/1000 µS waveshape.
Maximum
Reverse
Leakage
IR @ VR
(µA)
10000.0
5.0
5.0
5.0
5.0
5.0
Maximum
Clamping
Voltage
VC @ IPP
(Volts)
10.8
22.0
26.5
39.1
43.5
52.0
Maximum
Peak Pulse
Current
IPP
(A)
92.5
45.0
38.0
25.5
22.9
19.2
www.littelfuse.com
11
1 page |
Páginas | Total 1 Páginas | |
PDF Descargar | [ Datasheet 1KSMB36.PDF ] |
Número de pieza | Descripción | Fabricantes |
1KSMB30 | 1000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR | Littelfuse |
1KSMB30A | Surface Mount Transient Voltage Suppressor | Taiwan Semiconductor |
1KSMB30A | Transient Voltage Suppression Diodes | Littelfuse |
1KSMB30CA | Surface Mount Transient Voltage Suppressor | Taiwan Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |