|
|
Número de pieza | DMF5005N | |
Descripción | LCD Module | |
Fabricantes | OPTREX CORPORATION | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DMF5005N (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
No Preview Available ! LCD Module Specification
Type No. DMF5005N
First Edition
Approved by
February 6, 1997
Final Revision
*******
Checked by
Checked by
Prepared by
Production Div.
Quality Assurance Div.
Design Engineering Div.
Production Div.
Table of Contents
1. General Specifications .............................................................................2
2. Electrical Specifications...........................................................................3
3. Optical Specifications ..............................................................................6
4. I/O Terminal.............................................................................................8
5. Test..........................................................................................................10
6. Appearance Standards............................................................................11
7. Code System of Production Lot ..........................................................14
8. Type Number .........................................................................................14
9. Applying Precautions .............................................................................14
10. Handling Precautions .............................................................................15
Rev. Date
Revision History
Page
Comment
DMF5005N (AA) No.97-0022
OPTREX CORPORATION
OPTREX
Page 1/15
1 page 2.4.Power Supply ON/OFF Sequence
2.4.1.ON Sequence
SIGNAL
VCC
SIGNAL
0≦t
0≦t
VEE
2.4.2.OFF Sequence
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
0≦t
0≦t
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
SIGNAL
VCC
SIGNAL
VEE
2.4.3.Reset Sequence
SIGNAL
RESET T>2μs
VCC
VEE
T≧50ms
T≧0
Power On
Reset
T≧0
T≧50ms
T≧0
Reset Cancellation
Power Off
LEVEL
H Level
L Level
VCC
VSS
VCC
VEE
Please maintain the above sequence when turning on and off the power supply of the module.
If VEE is supplied to the module while internal alternate signal for LCD driving (M) is unstable or
RESET is active, DC component will be supplied to the LCD panel. This may cause damage to
the LCD module.
DMF5005N (AA) No.97-0022
OPTREX CORPORATION
OPTREX
Page 5/15
5 Page 6.Appearance Standards
6.1.Inspection conditions
The LCD shall be inspected under 40W white fluorescent light.
The distance between the eyes and the sample shall be more than 30cm.
All directions for inspecting the sample should be within 45゚against perpendicular line.
45゚
6.2.Definition of applicable Zones
A Zone
B Zone
C Zone
Bezel Flame
A Zone : Active display area
B Zone : Area from outside of "A Zone" to validity viewing area
C Zone : Rest parts
A Zone + B Zone = Validity viewing area
DMF5005N (AA) No.97-0022
OPTREX CORPORATION
OPTREX
Page 11/15
11 Page |
Páginas | Total 15 Páginas | |
PDF Descargar | [ Datasheet DMF5005N.PDF ] |
Número de pieza | Descripción | Fabricantes |
DMF5005N | LCD Module | OPTREX CORPORATION |
DMF5005N-AAE-CO | LCD Module | OPTREX CORPORATION |
DMF5005NF-SEW-BBE-CQ | LCD Module Technical Specification | OPTREX CORPORATION |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |