PG240128LRU-ATA-H PDF даташит
Спецификация PG240128LRU-ATA-H изготовлена «POWERTIP» и имеет функцию, называемую «LCD Module». |
|
Детали детали
Номер произв | PG240128LRU-ATA-H |
Описание | LCD Module |
Производители | POWERTIP |
логотип |
19 Pages
No Preview Available ! |
POWERTIP TECH. CORP.
DISPLAY DEVICES FOR BETTER ELECTRONIC DESIGN
Specification For Approval
hstomer
Aodel Type
;ample Code
Aass Production Code
Zevision
ELATEC
: LCD MODULE
PG240128LRU-ATA-H
hstomer Sign Sales Sign
Checked By Prepared By
(#026129)
I
NO.PT-R-106-3
No Preview Available ! |
5.Cursor pattern select
PG240128LRU-ATA-H Revision : 0 (DK)
ines cursor
ines cursor
ines cursor
When cursor display is ON, this command selects the cursor pattern from 1 line to 8 lines. The
cursor address is defined by cursor pointer set command.
1 line cursor
6.Data auto reaawrite
2 lines cursor
8 lines cursor
Code
10110000
10110001
10110010
Hex.
BOH
B1H
B2H
Function
Data auto write set
Data auto read set
Auto reset
Operand
-
-
-
This command is convenient to send full screen data from external display RAM.
After setting auto mode, “Data write (or read)” command is not necessary between each data
“Data write (or read)” command should follow the “Addresspointer set” and address pointer is
automaticallyincrement by + 1 after each data. After sending (or receiving) all data “Auto
reset” is necessary to return normal operation because all data is regarded “Display data” and no
command can be accepted in the auto mode.
Note : Status check for auto mode (STA2, STA should be checked between each data.
Auto reset should be performed after checking STA3=1 (STA2=1).
Please refer following flow chart.
dgi POWERTIP TECHNOLOGY CORPORATION
nmo DISPLAY DEVICES FOR BETTER ELECTRONIC DESIGN
Page 19
No Preview Available ! |
PG240128LRU-ATA-H Revision : 0 (DK)
Attribute function
“Reverse display” ,“Character blink” and “Inhibit” are called “Attribute”. The attribute data is
written in the graphic area defined by Control word set command.
The mode set command selects text display only and graphic display cannot be displayed.
The attribute data of the 1st character in text area is written at the 1st lbyte ingraphic area, and
attribute data of n-th character is written at the n-th lbyte in graphic area. Attribute function is
1 1 1 1 1 1 1AttributeRAMlbyte X X X X d3 d2 dl dO
4.Display mode
-
“LCursor blink
Cursor display
Text display
Graphic display
on: 1, off 0
on: 1, oft 0
on: 1, off 0
on: 1, o f t 0
Note: It is necessary to turn on “Text &splay” and “ Graphic display “ in following
case.
(1) Combination of textigraphic display
(2) Attribute function
POWERTIP TECHNOLOGY CORPORATION
010 DISPLAY DEVICES FOR BETTER ELECTRONIC DESIGN
Page 18
Скачать PDF:
[ PG240128LRU-ATA-H.PDF Даташит ]
Номер в каталоге | Описание | Производители |
PG240128LRU-ATA-H | LCD Module | POWERTIP |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |