DataSheet26.com

ACT4050 PDF даташит

Спецификация ACT4050 изготовлена ​​​​«Active-Semi» и имеет функцию, называемую «Wide Input 3.5A Step Down Converter».

Детали детали

Номер произв ACT4050
Описание Wide Input 3.5A Step Down Converter
Производители Active-Semi
логотип Active-Semi логотип 

13 Pages
scroll

No Preview Available !

ACT4050 Даташит, Описание, Даташиты
Active-Semi
ACT4050
Rev 2, 01-Jul-11
Wide Input 3.5A Step Down Converter
FEATURES
3.5A Output Current
Up to 96% Efficiency
4.5V to 15V Input Range
12µA Shutdown Supply Current
400kHz Switching Frequency
Adjustable Output Voltage From 0.817V
Cycle-by-Cycle Current Limit Protection
Thermal Shutdown Protection
Frequency Fold-Back at Short Circuit
Stability with Wide Range of Capacitors,
Including Low ESR Ceramic Capacitors
SOP-8/EP (Exposed Pad) Package
APPLICATIONS
Digital TV
Portable DVDs
Car-Powered or Battery-Powered Equipments
Set-Top Boxes
Telecom Power Supplies
Consumer Electronics
GENERAL DESCRIPTION
The ACT4050 is a current-mode step-down DC/DC
converter that provides up to 3.5A of output current
at 400kHz switching frequency. The device utilizes
Active-Semi’s proprietary high voltage process for
operation with input voltages up to 15V.
The ACT4050 provides fast transient response and
eases loop stabilization while providing excellent
line and load regulation. This device features a very
low ON-resistance power MOSFET which provides
peak operating efficiency up to 96%. In shutdown
mode, the ACT4050 consumes only 12μA of supply
current.
This device also integrates protection features
including cycle-by-cycle current limit, thermal
shutdown and frequency fold-back at short circuit.
The ACT4050 is available in a SOP-8/EP (Exposed
Pad) package and requires very few external
devices for operation.
TYPICAL APPLICATION CIRCUIT
Efficiency vs. Load Current
100
VIN = 7V
90
VIN = 12V
80
70
60
50 VOUT = 5V
0 500 1000 1500 2000 2500 3000 3500
Load Current (mA)
Innovative PowerTM
- 1 - www.active-semi.com
Copyright © 2011 Active-Semi, Inc.









No Preview Available !

ACT4050 Даташит, Описание, Даташиты
Active-Semi
ORDERING INFORMATION
PART NUMBER
ACT4050YH
ACT4050YH-T
TEMPERATURE RANGE
-40°C to 85°C
-40°C to 85°C
PIN CONFIGURATION
ACT4050
Rev 2, 01-Jul-11
PACKAGE
SOP-8/EP
SOP-8/EP
PINS
8
8
PACKING
TUBE
TAPE & REEL
SOP-8/EP
PIN DESCRIPTIONS
PIN NAME
DESCRIPTION
1
BS
Bootstrap. This pin acts as the positive rail for the high-side switch’s gate driver. Connect
a 10nF capacitor between BS and SW.
2
IN
Input Supply. Bypass this pin to GND with a low ESR capacitor. See Input Capacitor in
the Application Information section.
3 SW Switch Output. Connect this pin to the switching end of the inductor.
4
GND
Ground.
5
FB
Feedback Input. The voltage at this pin is regulated to 0.817V. Connect to the resistor
divider between output and ground to set output voltage.
6 COMP Compensation Pin. See Stability Compensation in the Application Information section.
Enable Input. When higher than 1.3V, this pin turns the IC on. When lower than 0.9V, this
7 EN pin turns the IC off. Output voltage is discharged when the IC is off. When left
unconnected, EN is pulled up to 4.5V typical with a 2µA pull-up current.
8 N/C Not Connected.
Exposed Pad shown as dashed box. The exposed thermal pad should be connected to
EP
EP
board ground plane and pin 4. The ground plane should include a large exposed copper
pad under the package for thermal dissipation (see package outline). The leads and
exposed pad should be flush with the board, without offset from the board surface.
Innovative PowerTM
- 2 - www.active-semi.com
Copyright © 2011 Active-Semi, Inc.









No Preview Available !

ACT4050 Даташит, Описание, Даташиты
Active-Semi
ACT4050
Rev 2, 01-Jul-11
ABSOLUTE MAXIMUM RATINGSc
PARAMETER
IN Supply Voltage
SW Voltage
BS Voltage
EN, FB Voltage
Continuous SW Current
Junction to Ambient Thermal Resistance (θJA)
Maximum Power Dissipation
Operating Junction Temperature
Storage Temperature
Lead Temperature (Soldering, 10 sec)
VALUE
-0.3 to 15
-1 to VIN + 1
VSW - 0.3 to VSW + 8
-0.3 to 6
Internally Limited
46
1.8
-40 to 150
-55 to 150
300
UNIT
V
V
V
V
A
°C/W
W
°C
°C
°C
c: Do not exceed these limits to prevent damage to the device. Exposure to absolute maximum rating conditions for long periods may
affect device reliability.
ELECTRICAL CHARACTERISTICS
(VIN = 12V, TA = 25°C, unless otherwise specified.)
PARAMETER
Input Voltage
Feedback Voltage
High-Side Switch On Resistance
Low-Side Switch On Resistance
SW Leakage
High-Side Switch Peak Current
Limit
COMP to Current Limit
Transconductance
Error Amplifier Transconductance
Error Amplifier DC Gain
Switching Frequency
Short Circuit Switching Frequency
Maximum Duty Cycle
Minimum On Time
SYMBOL
VIN
VFB
RONH
RONL
TEST CONDITIONS
VOUT = 3V, ILOAD = 0V to 1A
5V VIN 15V
VEN = 0
ILIM Duty Cycle = 50%
GCOMP
GEA
AVEA
fSW
DMAX
Ton_Min
ΔICOMP = ±10µA
VFB = 0
VFB = 0.7V
Minimum Duty Cycle
Enable Threshold Voltage
Enable Pull-Up Current
Supply Current in Shutdown
IC Supply Current in Operation
Thermal Shutdown Temperature
VFB = 0.9V
Hysteresis = 0.1V
Pin pulled up to 4.5V typically
when left unconnected
VEN = 0
VEN = 3V, VFB = 0.9V
Hysteresis = 10°C
Innovative PowerTM
-3-
MIN TYP MAX UNIT
4.5 15 V
0.8 0.817 0.834
V
0.15
4.5
0 10 µA
5.4 A
2.5 A/V
650 µA/V
4000
V/V
350 400 450 kHz
60 kHz
95 %
400 ns
0%
0.8 1.1 1.4
V
2 µA
12 20 µA
0.5 1 mA
160 °C
www.active-semi.com
Copyright © 2011 Active-Semi, Inc.










Скачать PDF:

[ ACT4050.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
ACT4050Wide Input 3.5A Step Down ConverterActive-Semi
Active-Semi

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск