DataSheet26.com

PAM8610 PDF даташит

Спецификация PAM8610 изготовлена ​​​​«Diodes» и имеет функцию, называемую «10W STEREO CLASS-D AUDIO POWER AMPLIFIER».

Детали детали

Номер произв PAM8610
Описание 10W STEREO CLASS-D AUDIO POWER AMPLIFIER
Производители Diodes
логотип Diodes логотип 

15 Pages
scroll

No Preview Available !

PAM8610 Даташит, Описание, Даташиты
A Product Line of
Diodes Incorporated
PAM8610
10W STEREO CLASS-D AUDIO POWER AMPLIFIER WITH DC VOLUME CONTROL
Description
The PAM8610 is a 10W (per channel) stereo Class-D audio amplifier
with DC Volume Control which offers low THD+N (0.1%), low EMI,
and good PSRR thus high-quality sound reproduction. The 32 steps
DC volume control has a +32dB to -75dB range.
Pin Assignments
The PAM8610 runs off of a 7V to 15V supply at much higher
efficiency than competitors’ ICs.
The PAM8610 only requires very few external components,
significantly saving cost and board space.
The PAM8610 is available in a 40pin QFN 6mm*6mm package.
Features
10W @ 10%THD/Channel Output into a 8Load at 13V
Low Noise: -90dB
Over 90% Efficiency
32 Step DC Volume Control from -75dB to +32dB
With Shutdown/Mute/Fade Function
Over Current , Thermal and Short-Circuit Protection
Low THD+N
Low Quiescent Current
Pop Noise Suppression
Small Package Outlines: Thin 40-pin QFN 6mm*6mm Package
Pb-Free Package (RoHS Complaint)
Applications
Flat Monitor /LCD TVS
Multi-Media Speaker System
DVD Players, Game Machines
Boom Box
Music Instruments
Typical Applications Circuit
PAM8610
Document number: DSxxxxx Rev. 1 - 2
1 of 15
www.diodes.com
June 2013
© Diodes Incorporated









No Preview Available !

PAM8610 Даташит, Описание, Даташиты
A Product Line of
Diodes Incorporated
PAM8610
Pin Descriptions
Pin Number
1
2
3
4
5
6
7
8
9
10
11, 20
12, 19
13, 14
15
16
17, 18
21
22
23
24, 28
25
26
27
29
30
31, 40
32, 39
33, 34
35
36
37, 38
Pin Name
RINN
RINP
AVDD
VREF
VOLUME
REF GND
AGND1
FADE
LINP
LINN
PGNDL
PVCCL
LOUTN
BSLN
BSLP
LO UTP
VCLAMPL
CO SC
RO SC
AGND
MUTE
AVCC
V2P5
SD
VCLAMPR
PGNDR
PVCCR
ROUTP
BSRP
BSRN
ROUTN
Function
Negative differential audio input for right channel.
Positive differential audio input for right channel.
5V Analog VDD
Analog reference for gain control section.
DC voltage that sets the gain of the amplifier.
Ground for gain control circuitry. Connect to AGND. If using a DAC to control the
volume, connect the DAC ground to this terminal.
Analog GND
Input for controlling volume ramp rate when cycling SD or during power-up. A
logic low on this pin places the amplifier in fade mode. A logic high on this pin
allows a quick transition to the desired volume setting.
Positive differential audio input for left channel.
Negative differential audio input for left channel.
Power ground for left channel H-bridge.
Power supply for left channel H-bridge, not connected to PVCCR or AVCC.
Class-D 1/2-H-bridge negative output for left channel.
Bootstrap I/O for left channel, negative high-side FET.
Bootstrap I/O for left channel, positive high-side FET.
Class-D 1/2-H-bridge positive output for left channel.
Internally generated voltage supply for left channel bootstrap capacitors.
I/O for charge/discharging currents onto capacitor for ramp generator triangle
wave biased at V2P5.
Current setting resistor for ramp generator. Nominally equal to 1/8*VCC.
Analog GND
A logic high on this pin disables the outputs and a logic low enables the outputs.
High-voltage analog power supply (7V to 15V)
2.5V Reference for analog cells, as well as reference for unused audio input
when using single-ended inputs.
Shutdown signal for IC (low = shutdown, high = operational). TTL logic levels with
compliance to VCC.
Internally generated voltage supply for right channel bootstrap capacitors.
Power ground for right channel H-bridge.
Power supply for right channel H-bridge, not connected to PVCCL or AVCC.
Class-D 1/2-H-bridge positive output for right channel.
Bootstrap I/O for right channel, positive high-side FET.
Bootstrap I/O for right channel, negative high-side FET.
Class-D 1/2-H-bridge negative output for right channel.
PAM8610
Document number: DSxxxxx Rev. 1 - 2
2 of 15
www.diodes.com
June 2013
© Diodes Incorporated









No Preview Available !

PAM8610 Даташит, Описание, Даташиты
Functional Block Diagram
A Product Line of
Diodes Incorporated
PAM8610
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)
These are stress ratings only and functional operation is not implied. Exposure to absolute maximum ratings for prolonged time periods may
affect device reliability. All voltages are with respect to ground.
Parameter
Supply Voltage VDD
Input Voltage RangeVI:
MUTE, VREF, VOLUME, FADE
SD
RINN, RINP, LINN, LINP
Junction Temperature Range, TJ
Storage Temperature
Lead Temperature 1, 6mm (1/16 inch)
Rating
-0.3 to +16.5
0 to +6.0
-0.3 to VDD
-0.3 to +6.0
-40 to +125
-65 to +150
260, 5 sec
Unit
V
V
°C
PAM8610
Document number: DSxxxxx Rev. 1 - 2
3 of 15
www.diodes.com
June 2013
© Diodes Incorporated










Скачать PDF:

[ PAM8610.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
PAM861010W STEREO CLASS-D AUDIO POWER AMPLIFIERDiodes
Diodes
PAM861010W Stereo Class-D Audio Power AmplifierPower Analog Micoelectronics
Power Analog Micoelectronics
PAM861516W/ 32W STEREO CLASS-D AUDIO POWER AMPLIFIERDiodes
Diodes

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск