|
|
Número de pieza | AZ822 | |
Descripción | SUBMINIATURE DIP RELAY | |
Fabricantes | ZETTLER | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AZ822 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! AZ822
SUBMINIATURE
DIP RELAY
FEATURES
• Low profile for compact board spacing
• DC coils to 48VDC
• Life expectancy to 10 million operations
• Standard PC 0.1" grid terminal spacing
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500V lightning surge
• Meets FCC Part 68.304 1000V dielectric
• UL, CUR file E43203
CONTACTS
Arrangement
Ratings
Material
Resistance
DPDT (2 Form C)
Bifurcated crossbar contacts
Resistive load:
Max. switched power: 60W or 125VA
Max. switched current: 2A
Max. switched voltage: 220VDC or 250VAC
UL Rating: 1A at 24VDC
0.5A at 120VAC
Silver palladium, gold clad
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
98mW (Standard coils)
74mW (Sensitive coils)
0.94W at 20°C (68°F)
15°C (27°F) at nominal coil voltage
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay adjustment may be affected if undue pressure is exerted
on relay case.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
5 x 105 at 1A, 24VDC
Operate Time (typical) 5ms at nominal coil voltage
Release Time (typical) 2ms at nominal coil voltage
(with no coil suppression)
Capacitance (max.)
Bounce
(typical)
Contact to contact: 1.2pF
Contact set to contact set: 1.6pF
Contact to coil: 1.5pF
At 10mA contact current
2ms at operate N.O. side
3ms at operate N.C. side
Dielectric Strength
1000Vrms contact to coil
(at sea level for 1 min.) 1000Vrms contact to contact
1000Vrms between contact sets
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-55°C (-67°F) to 90°C (194°F)
Storage
-55°C (-67°F) to 105°C (221°F)
Vibration
Shock
0.062" DA at 10–55 Hz
10 g
Enclosure
P.B.T. polyester (UL94 V-0)
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
Approx. 4.5 grams
2/1/16
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet AZ822.PDF ] |
Número de pieza | Descripción | Fabricantes |
AZ821 | (AZ831 / AZ821) SUBMINIATURE DIP RELAY | ETC |
AZ822 | SUBMINIATURE DIP RELAY | ZETTLER |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |