DataSheet26.com

ADA4895-2 PDF даташит

Спецификация ADA4895-2 изготовлена ​​​​«Analog Devices» и имеет функцию, называемую «Railto-Rail Output Amplifier».

Детали детали

Номер произв ADA4895-2
Описание Railto-Rail Output Amplifier
Производители Analog Devices
логотип Analog Devices логотип 

24 Pages
scroll

No Preview Available !

ADA4895-2 Даташит, Описание, Даташиты
Data Sheet
Low Power, 1 nV/√Hz, G ≥ 10 Stable, Rail-
to-Rail Output Amplifier
ADA4895-1/ADA4895-2
FEATURES
Low wideband noise
1 nV/√Hz
1.6 pA/√Hz
Low 1/f noise: 2 nV/√Hz at 10 Hz
Low distortion (SFDR): −96 dBc at 100 kHz, VOUT = 2 V p-p
Low power: 3 mA per amplifier
Low input offset voltage: 350 µV maximum
High speed
236 MHz, −3 dB bandwidth (G = +10)
943 V/µs slew rate
22 ns settling time to 0.1%
Rail-to-rail output
Wide supply range: 3 V to 10 V
Disable feature
APPLICATIONS
Low noise preamplifier
Ultrasound amplifiers
PLL loop filters
High performance analog-to-digital converter (ADC) drivers
Digital-to-analog converter (DAC) buffers
GENERAL DESCRIPTION
The ADA4895-1 (single) and ADA4895-2 (dual) are high speed
voltage feedback amplifiers that are gain ≥ 10 stable with low
input noise, rail-to-rail output, and a quiescent current of 3 mA per
amplifier. With a 1/f noise of 2 nV/√Hz at 10 Hz and a spurious-
free dynamic range (SFDR) of −72 dBc at 2 MHz, the ADA4895-1/
ADA4895-2 are an ideal solution in a variety of applications,
including ultrasound, low noise preamplifiers, and drivers of
high performance ADCs. The Analog Devices, Inc., proprietary
next generation SiGe bipolar process and innovative architecture
enables the high performance of these amplifiers.
The ADA4895-1/ADA4895-2 have a small signal bandwidth of
236 MHz at a gain of +10 with a slew rate of 943 V/µs, and settle
to 0.1% in 22 ns. The wide supply voltage range (3 V to 10 V)
of the ADA4895-1/ADA4895-2 make these amplifiers ideal
candidates for systems that require large dynamic range, high
gain, precision, and high speed.
The ADA4895-1 is available in 8-lead SOIC and 6-lead SOT-23
packages, and the ADA4895-2 is available in a 10-lead MSOP
package. All packages operate over the extended industrial
temperature range of −40°C to +125°C.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
FUNCTIONAL BLOCK DIAGRAMS
NC 1
8 DISABLE
–IN 2
+IN 3
7 +VS
6 OUT
–VS 4 ADA4895-1 5 NC
NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
Figure 1. ADA4895-1 Single Amplifier (8-Lead SOIC)
OUT1 1
–IN1 2
+IN1 3
–VS 4
DISABLE1 5
10 +VS
9 OUT2
8 –IN2
7 +IN2
ADA4895-2 6 DISABLE2
Figure 2. ADA4895-2 Dual Amplifier (10-Lead MSOP)
5 30
4 24
3 18
2 12
VOLTAGE
16
CURRENT
00
1 10 100 1k 10k 100k 1M
FREQUENCY (Hz)
Figure 3. Input Voltage and Current Noise vs. Frequency
Table 1. Other Low Noise Amplifiers1
Part Number(s)
ven at 100 kHz Bandwidth
(nV/√Hz)
(MHz)
AD8021
2.1 490
AD8045
3 1000
AD8099
0.95 510
ADA4841-1/ADA4841-2 2.1
80
ADA4896-2
1
230
ADA4897-1/ADA4897-2 1
230
ADA4898-1/ADA4898-2 0.9
65
ADA4899-1
1
600
Supply
Voltage (V)
5 to 24
3.3 to 12
5 to 12
2.7 to 12
3 to 10
3 to 10
10 to 32
5 to 12
1 See www.analog.com for the latest selection of low noise amplifiers.
COMPANION PRODUCTS
ADCs: AD7944 (14-bit), AD7985 (16-bit), AD7986 (18-bit)
Additional companion products on the ADA4895-1/ADA4895-2
product page
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com









No Preview Available !

ADA4895-2 Даташит, Описание, Даташиты
ADA4895-1/ADA4895-2
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagrams............................................................. 1
Companion Products ....................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
±5 V (or +10 V) Supply ............................................................... 3
±2.5 V (or +5 V) Supply .............................................................. 4
±1.5 V (or +3 V) Supply .............................................................. 5
Absolute Maximum Ratings............................................................ 7
Thermal Resistance ...................................................................... 7
Maximum Power Dissipation ..................................................... 7
ESD Caution.................................................................................. 7
Pin Configurations and Function Descriptions ........................... 8
Typical Performance Characteristics ........................................... 10
REVISION HISTORY
4/15—Rev. A to Rev. B
Changes to Amplifier Description Section ................................. 16
Changes to Ordering Guide .......................................................... 24
12/12—Rev. 0 to Rev. A
Added ADA4895-1.............................................................Universal
Changes to Features Section, General Description Section, and
Table 1 ............................................................................................................. 1
Added Figure 1; Renumbered Sequentially .................................. 1
Changes to Table 2............................................................................ 3
Changes to Table 3............................................................................ 4
Changes to Table 4............................................................................ 5
Changes to Figure 4.......................................................................... 7
Added Figure 5, Table 7, Figure 6, and Table 8............................. 8
Added Figure 14 and Figure 17..................................................... 11
Changes to Figure 24...................................................................... 12
Added Figure 26 and Figure 29..................................................... 13
Changes to Amplifier Description Section ................................. 16
Changes to Noise Considerations Section .................................. 18
Added Feedback Capacitor Applications Section and
Figure 54 .......................................................................................... 20
Updated Outline Dimensions ....................................................... 23
Changes to Ordering Guide .......................................................... 24
9/12—Revision 0: Initial Version
Data Sheet
Theory of Operation ...................................................................... 16
Amplifier Description................................................................ 16
Input Protection ......................................................................... 16
Disable Operation ...................................................................... 16
DC Errors .................................................................................... 17
Bias Current Cancellation ......................................................... 17
Noise Considerations................................................................. 18
Applications Information .............................................................. 19
Using the ADA4895-1/ADA4895-2 at a Gain < +10.............. 19
High Gain Bandwidth Application .......................................... 20
Feedback Capacitor Application .............................................. 20
Wideband Photomultiplier Preamplifier ................................ 21
Layout Considerations............................................................... 22
Outline Dimensions ....................................................................... 23
Ordering Guide .......................................................................... 24
Rev. B | Page 2 of 24









No Preview Available !

ADA4895-2 Даташит, Описание, Даташиты
Data Sheet
SPECIFICATIONS
±5 V (OR +10 V) SUPPLY
TA = 25°C, G = +10, RF = 249 Ω, RL = 1 kΩ to midsupply, unless otherwise noted.
Table 2.
Parameter
DYNAMIC PERFORMANCE
−3 dB Bandwidth
Bandwidth for 0.1 dB Flatness
Slew Rate
Settling Time to 0.1%
NOISE/HARMONIC PERFORMANCE
Harmonic Distortion (SFDR)
Input Voltage Noise
Input Current Noise
0.1 Hz to 10 Hz Noise
DC PERFORMANCE
Input Offset Voltage
Input Offset Voltage Drift
Input Bias Current
Input Bias Current Drift
Input Bias Offset Current
Open-Loop Gain
INPUT CHARACTERISTICS
Input Resistance
Input Capacitance
Input Common-Mode Voltage Range
Common-Mode Rejection
OUTPUT CHARACTERISTICS
Output Overdrive Recovery Time
Positive Output Voltage Swing
Negative Output Voltage Swing
Linear Output Current
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Operating Range
Quiescent Current per Amplifier
Positive Power Supply Rejection
Negative Power Supply Rejection
Test Conditions/Comments
VOUT = 0.2 V p-p
VOUT = 2 V p-p
VOUT = 0.2 V p-p, G = +20, RF = 1 kΩ
VOUT = 2 V p-p, RL = 100 Ω
VOUT = 6 V step
VOUT = 2 V step
fC = 100 kHz, VOUT = 2 V p-p
fC = 1 MHz, VOUT = 2 V p-p
fC = 2 MHz, VOUT = 2 V p-p
fC = 5 MHz, VOUT = 2 V p-p
f = 10 Hz, G = +25.9
f = 100 kHz, G = +25.9
f = 10 Hz, RF = 10 kΩ, RG = 1.1 kΩ, RS = 1 kΩ
f = 100 kHz, RF = 10 kΩ, RG = 1.1 kΩ, RS = 1 kΩ
G = +101, RF = 1 kΩ, RG = 10 Ω
VOUT = −4 V to +4 V
Common mode/differential mode
Common mode/differential mode
VCM = −2 V to +2 V
VIN = −0.55 V to +0.55 V
RL = 1 kΩ
RL = 100 Ω
RL = 1 kΩ
RL = 100 Ω
SFDR = −45 dBc
Sinking/sourcing
30% overshoot
DISABLEx = −5 V
+VS = 4 V to 6 V, −VS = −5 V
+VS = 5 V, −VS = −4 V to −6 V
ADA4895-1/ADA4895-2
Min Typ
Max Unit
236 MHz
146 MHz
115 MHz
8.9 MHz
943 V/µs
22 ns
−96 dBc
−78 dBc
−72 dBc
−64 dBc
2 nV/√Hz
1 nV/√Hz
14 pA/√Hz
1.6 pA/√Hz
99 nV p-p
−350
−16
−0.6
100
+53
0.15
−11
1.2
−0.02
110
+350
−6
+0.6
µV
µV/°C
µA
nA/°C
µA
dB
−100
10 M/10 k
3/11
−4.9 to +4.1
−109
pF
V
dB
4.85
4.5
−4.85
−4.5
80
4.96
4.77
−4.97
−4.85
80
116/111
6
ns
V
V
V
V
mA rms
mA
pF
3 to 10
2.8 3
0.1
−98 −136
−98 −135
V
3.2 mA
mA
dB
dB
Rev. B | Page 3 of 24










Скачать PDF:

[ ADA4895-2.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
ADA4895-1Railto-Rail Output AmplifierAnalog Devices
Analog Devices
ADA4895-2Railto-Rail Output AmplifierAnalog Devices
Analog Devices

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск