DataSheet26.com

380D25 PDF даташит

Спецификация 380D25 изготовлена ​​​​«OPTO22» и имеет функцию, называемую «Solid-State Relays».

Детали детали

Номер произв 380D25
Описание Solid-State Relays
Производители OPTO22
логотип OPTO22 логотип 

23 Pages
scroll

No Preview Available !

380D25 Даташит, Описание, Даташиты
Solid-State Relays
Features
Rugged, epoxy encapsulation construction
4,000 volts of optical isolation
Subjected to full load test and six times the rated
current surge before and after encapsulation
Unique heat-spreader technology
Guaranteed for life
Opto 22 Power
Series SSR
improvements and the same 100% testing policy established
over 40 years ago, Opto 22 is still recognized today for the very
high quality and reliability of all our solid-state relays.
Overview
In 1974, Opto 22 introduced the first liquid epoxy-filled line of
power solid-state relays (SSR). This innovation in SSR design
greatly improved the reliability and reduced the cost of
manufacturing. At that time, we also incorporated into our
manufacturing process 100% testing under full load
conditions of every relay we produced.
By 1978, Opto 22 had gained such a reputation for reliability
that we were recognized as the world’s leading manufacturer
of solid-state relays. Through continuous manufacturing
Part Numbers
Part
Description
AC Switching
120A10
120A25
240A10
240A25
240A45
120D3
120D10
120D25
120D45
240D3
240D10
240Di10
240D25
240Di25
240D30-HS
240D45
240Di45
380D25
380D45
480D10-12
480D15-12
480D25-12
480D25-HS
480D45-12
120 VAC, 10 Amp, AC Control
120 VAC, 25 Amp, AC Control
240 VAC, 10 Amp, AC Control
240 VAC, 25 Amp, AC Control
240 VAC, 45 Amp, AC Control
120 VAC, 3 Amp, DC Control
120 VAC, 10 Amp, DC Control
120 VAC, 25 Amp, DC Control
120 VAC, 45 Amp, DC Control
240 VAC, 3 Amp, DC Control
240 VAC, 10 Amp, DC Control
240 VAC, 10 Amp, DC Control, with LED Indica-
tors
240 VAC, 25 Amp, DC Control
240 VAC, 25 Amp, DC Control, with LED Indica-
tors
240 VAC, 30 Amp, DC Control, with integrated
heatsink
240 VAC, 45 Amp, DC Control
240 VAC, 45 Amp, DC Control, with LED Indica-
tors
380 VAC, 25 Amp, DC Control
380 VAC, 45 Amp, DC Control
480 VAC, 10 Amp, DC Control, Transient Proof
480 VAC, 15 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof,
with integrated heatsink
480 VAC, 45 Amp, DC Control, Transient Proof
Description
Opto 22 offers a complete line of SSRs, from the rugged 120/
240/380-volt AC Series to the small footprint MP Series,
designed for mounting on printed circuit boards. All Opto 22
SSRs feature 4,000 volts of optical isolation, and most are UL
and CSA recognized. The innovative use of room-temperature
liquid epoxy encapsulation, coupled with Opto 22’s unique
heat-spreader technology, are key to mass producing the
world’s most reliable solid state relays.
Every Opto 22 solid state relay is subjected to full load test and
six times the rated current surge both before and after
Part
Description
AC Switching
575D15-12
575D45-12
575D30-HS
575Di45-12
MP120D2
or P120D2
MP120D4
or P120D4
MP240D2
or P240D2
MP240D4
or P240D4
MP380D4
Z120D10
Z240D10
575 VAC, 15 Amp, DC Control, Transient Proof
575 VAC, 45 Amp, DC Control, Transient Proof
575 VAC, 30 Amp, DC Control, Transient Proof,
with integrated heatsink
575 VAC, 45 Amp, DC Control, Transient Proof,
with LED Indicators
120 VAC, 2 Amp, DC Control.
P model is low profile.
120 VAC, 4 Amp, DC Control.
P model is low profile.
240 VAC, 2 Amp, DC.
P model is low profile.
240 VAC, 4 Amp, DC.
P model is low profile.
380 VAC, 4 Amp, DC
Z Model, 120 VAC, 10 Amp, DC Control
Z Model, 240 VAC, 10 Amp, DC Control
DC Switching
DC60P or
DC60MP
DC200P or
DC200MP
DC60S-3
DC60S-5
60 VDC, 3 Amp, DC Control.
P model is low profile.
200 VDC, 1 Amp, DC Control.
P model is low profile.
60 VDC, 3 Amp, DC Control
60 VDC, 5 Amp, DC Control
Accessories
SAFETY COVER
SSR-HS
SSR-THERMOPAD
Power Series SSR safety cover
Power Series SSR heatsink
Thermal conductive pad (pack of 10)
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1









No Preview Available !

380D25 Даташит, Описание, Даташиты
Solid-State Relays
encapsulation. This double testing of every part before it
leaves the factory means you can rely on Opto 22 solid state
relays. All Opto 22 SSRs are guaranteed for life.
Accessories for the Power-Series SSRs include a safety cover, a
heatsink, and a matching thermal conductive pad. See page 3.
Power Series SSRs
Opto 22 provides a full range of
Power Series relays with a wide
variety of voltage (120–575 volts)
and current options (3–45 amps).
All Power Series relays feature 4,000
volts of optical isolation and have a
high PRV rating. Some Power Series
relays include built-in LEDs to
indicate operation.
See page 4.
DC Series
The DC Series delivers isolated DC control to large OEM
customers worldwide. All DC control SSRs are LS TTL
compatible.
AC Series
The AC Series offers the ultimate in solid state reliability. All AC
Power Series relays feature a built-in snubber as well as zero-
voltage turn-on and zero-current turn-off. Transient-proof
models offer self protection for noisy electrical environments.
Z Series SSRs
The Z Series employs a unique heat
transfer system that makes it
possible for Opto 22 to deliver a
low-cost, 10-amp, solid state relay
in an all-plastic case. The push-on,
tool-free quick-connect terminals
make the Z Series ideal for high-
volume OEM applications.
Operating temperature: –40 °C to
100 °C. See page 7.
Printed Circuit Series SSRs
Opto 22’s Printed Circuit Series
allows OEMs to easily deploy solid
state relays on printed circuit
boards. Two unique packages are
available, both of which will switch
loads up to four amps. Operating
temperature: –40 °C to 100 °C. See
page 9.
MP Series
The MP Series packaging is designed with a minimum
footprint to allow maximum relay density on the printed
circuit board.
P Series
The P Series power relays provide low-profile [0.5 in.
(12.7 mm)] center mounting on printed circuit boards.
HS Series SSRs
The HS Series features an integrated
heatsink, which makes them so cool.
These relays have less thermal
resistance inside, so heat dissipates
more easily than in a standard SSR
mounted to the same heatsink. With
the heatsink built-in, you don't have
to select one from a catalog, and
installation is much easier. Includes a
DIN-rail adapter. See page 13.
Specifications
(all Power Series models)
4,000 V optical isolation, input to output
Zero voltage turn-on
Zero-current turn-off
Turn-on time: 0.5 cycle maximum
Turn-off time: 0.5 cycle maximum
Operating temperature: –40 °C to 100 °C
Operating frequency: 25 to 65 Hz
(operates at 400 Hz with six times off-state leakage)
Coupling capacitance, input to output: 8 pF maximum
Hermetically sealed
DV/DT Off-state: 200 volts per microsecond
DV/DT commutating: snubbed for rated current at
0.5 power factor
UL recognized
CSA certified
CE component
Torque specs for screws (this spec is both the
recommended torque and the maximum torque you
should use):
Control terminals, 10 in-lb (1.13 N-m)
Field terminals, 18 in-lb (2.03 N-m)
PAGE
2
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.









No Preview Available !

380D25 Даташит, Описание, Даташиты
Solid-State Relays
Power Series SSR Accessories
Safety Cover
A plastic safety cover (Opto 22 part number SAFETY COVER) is
available for use with Opto 22 Power Series SSRs. The safety
cover reduces the chance of accidental contact with relay
terminals, while providing access holes for test
instrumentation.
25 Amp Relay on SSR-HS Heatsink Derating
30
25
20
15 H
10
V
5
20 30 40 50 60 70 80 90 100
Ambient Temperature (°C)
V: Heatsink mounted to a vertical surface
H: Heatsink mounted to a horizontal surface.
An optional plastic safety cover can be installed on a Power Series SSR.
SSR-HS Heatsink
Custom designed for the Power Series SSRs, the SSR-HS
heatsink provides excellent heat dissipation when mounted to
the SSR with a matching thermal conductive pad, used in
place of silicon grease. One thermal pad is included with the
heatsink. Additional pads may be purchased in packs of 10
(part number SSR-THERMOPAD). DIN-rail adapter is included.
Heatsink Assembly
Before attaching the SSR, remove the protective film from
both sides of the thermal pad, then place the pad on the
heatsink making sure to align the holes. Secure the SSR to the
heatsink with the two 8-32 x 3/8˝ panhead Phillips screws
included in the kit. Use 20 in-lb (2.26 N-m) of torque.
Screws
Power Series SSR
(not included)
Thermal Ratings
The thermal ratings shown in the following graphs were
obtained with an SSR attached to a heatsink using a thermal
conductive pad.
45 Amp Relay on SSR-HS Heatsink Derating
30
25
20
15 H
V
10
5
20 30 40 50 60 70 80 90 100
Ambient Temperature (°C)
V: Heatsink mounted to a vertical surface
H: Heatsink mounted to a horizontal surface.
Thermal conductive pad
Heatsink
NOTE: To take advantage of the
cooling effect of natural air flow,
mount the SSR/heatsink assembly to
a vertical surface with the Opto 22
logo right side up as shown here.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected]SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
3










Скачать PDF:

[ 380D25.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
380D25Solid-State RelaysOPTO22
OPTO22

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск