|
|
PDF BP3580 Data sheet ( Hoja de datos )
| Número de pieza | BP3580 | |
| Descripción | IEEE802.11b/g/n��1x1) Wireless LAN Module | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BP3580 (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
|
No Preview Available !
IEEE802.11b/g/n（1x1) Wireless LAN Module BP3580
HARDWARE SPECIFICATION
Version 1.0.4
PROPRIETARY AND CONFIDENTIAL
1 page  
IEEE802.11b/g/n (1x1) BP3580
Hardware Specification
3 ABSOLUTE MAXIMUM RATINGS
2012/09/25
No. PARAMETER
1 Power supply voltage
Operating temperature
2
range
Storage
3
temperature range
4 ESD endurance(*)
SYMBOL
VCC
Topr
Tstg
Vsurge
LIMITS
-0.3 ～ +3.6
UNIT
V
-40 ～ 85
℃
REMARKS
DC
-
-55 ～ 125
±200
℃-
ESD-HBM
V MIL-STD-883/METHOD
3015
(*)RF-SW of the pin 35 (Ant terminal) inside is weak against static because of the specific.
Please do enough static provision for operating module.
Note) These are the values that must not be exceeded at any time under any application or any test
conditions.
Please make design keeping enough margins accordingly.
PROPRIETARY AND CONFIDENTIAL 5/28
5 Page 
IEEE802.11b/g/n (1x1) BP3580
Hardware Specification
2012/09/25
Table 1. Terminal Functions（2/2）
No. Terminal I/O
Function
Remarks
25 GND
-
Ground
-
26 GPIO8/32k I/O General purpose Input/Output 8 GP108 or 32.768kHz clock input
27 GPIO6 I/O General purpose Input/Output 6
28 GPIO2 I/O General purpose Input/Output 2
-
29 V28
- Bypass capacitor terminal(2.8V)
-
30 M_ANA AI/O Analog monitor terminal
For Debug
31 GPIO1 I/O General purpose Input/Output 1
-
32 GPIO0 I/O General purpose Input/Output 0
-
33 GND
-
Ground
-
34 GND
-
Ground
-
35
ANT
AI/O
RF Input/Output
Antenna terminal（50Ω）
36 GND
-
Ground
-
37 GND
-
Ground
-
38 FLASH_SEL I (*)
Flash memory area select
0: Region1, 1: Region2
39 FLASH_TXD I/O
Flash memory sending data
Flash boot terminal
40 FLASH_CLK O
Flash memory clock
Flash boot terminal
41 FLASH_CSB O
Flash memory selection
Flash boot terminal
42 FLASH_RXD I
Flash memory receiving data
Flash boot terminal
43 HOST_SEL I (*)
Host I/F select
0:USB 1:SDIO
44 BOOT_SEL0 I (*)
45 BOOT_SEL1 I (*)
Boot mode select
46 UART_TXD O
UART transmit data
47 UART_RXD I
UART receiving data
48 GND
-
Ground
Please refer to pin number in “DIMENSIONS.”
BOOT_SEL[1:0]
00:USB, 01:SDIO, 10:FLASH,
11:UART
-
-
-
V12 terminal and V28 terminal are for the external bypass capacitor.
Be sure to connect the capacitor with large capacitance to VCC terminal and V28 terminal.
Please match (impedance matching) ANT terminal (pin 35) to 50Ω.
PROPRIETARY AND CONFIDENTIAL 11/28
11 Page | ||
| Páginas | Total 28 Páginas | |
| PDF Descargar | [ Datasheet BP3580.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BP3580 | IEEE802.11b/g/n��1x1) Wireless LAN Module | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |