DataSheet26.com

CMS20I30A PDF даташит

Спецификация CMS20I30A изготовлена ​​​​«Toshiba» и имеет функцию, называемую «Schottky Barrier Diode».

Детали детали

Номер произв CMS20I30A
Описание Schottky Barrier Diode
Производители Toshiba
логотип Toshiba логотип 

8 Pages
scroll

No Preview Available !

CMS20I30A Даташит, Описание, Даташиты
Schottky Barrier Diode
CMS20I30A
1. Applications
• Secondary Rectification in Switching Regulators
• Reverse-Current Protection in Mobile Devices
2. Features
(1) Peak forward voltage: VFM = 0.45 V (max)@IFM = 2.0 A
(2) Average forward current: IF(AV) = 2.0 A
(3) Repetitive peak reverse voltage: VRRM = 30 V
(4) Small, thin package suitable for high-density board assembly
Toshiba Nickname: M-FLATTM
3. Packaging and Internal Circuit Pin Assignment
CMS20I30A
3-4E1S
1: Anode
2: Cathode
Start of commercial production
2010-10
1 2014-04-01
Rev.2.0









No Preview Available !

CMS20I30A Даташит, Описание, Даташиты
CMS20I30A
4. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25)
Characteristics
Symbol Note
Rating
Unit
Repetitive peak reverse voltage
VRRM
30
V
Average forward current
IF(AV) (Note 1)
2.0
A
Non-repetitive peak forward surge current
IFSM (Note 2)
30
Junction temperature
Tj
150
Storage temperature
Tstg -55 to 150
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: T= 118 , square wave (α = 180°), VR = 15 V
Note 2: f = 50 Hz, half-sine wave
5. Thermal Characteristics
Characteristics
Thermal resistance (junction-to-ambient)
Symbol
Rth(j-a)
Thermal resistance (junction-to-lead)
Rth(j-ℓ)
Note
Test Condition
Max
Device mounted on a ceramic board
(soldering land size: 2 mm × 2 mm)
Device mounted on a glass-epoxy board
(soldering land size: 6 mm × 6 mm)
Junction to cathode lead
60
135
16
6. Electrical Characteristics (Unless otherwise specified, Ta = 25)
Unit
/W
Characteristics
Symbol Note
Test Condition
Min Typ. Max Unit
Peak forward voltage
VFM(1)
IFM = 0.1 A (pulse measurement)
0.25
V
VFM(2)
IFM = 1.0 A (pulse measurement)
0.33
VFM(3)
IFM = 2.0 A (pulse measurement)
0.35 0.45
Repetitive peak reverse current
IRRM(1)
VRRM = 5 V (pulse measurement)
14 µA
IRRM(2)
VRRM = 30 V (pulse measurement)
28 100
Junction capacitance
Cj VR = 10 V, f = 1.0 MHz
82 pF
7. Marking
Marking Code
SP
Part Number
CMS20I30A
Fig. 7.1 Marking
2
2014-04-01
Rev.2.0









No Preview Available !

CMS20I30A Даташит, Описание, Даташиты
CMS20I30A
8. Usage Considerations
(1) Schottky barrier diodes (SBDs) have reverse current greater than other types of diodes. This makes
SBDs more vulnerable to damage due to thermal runaway under high-temperature and high-voltage
conditions. Thus, both forward and reverse power losses of SBDs should be considered for thermal and
safety design.
(2) The absolute maximum ratings are rated values that must not be exceeded during operation, even for an
instant. The following are the recommended general derating methods for designing a circuit board using
this device.
VRRM:Use this rating with reference to (1) above. VRRM has a temperature
coefficient of 0.1%/at low temperatures. Take this coefficient into account when designing a
circuit board that will be operated in a low-temperature environment.
IF(AV):We recommend that the worst-case current be no greater than 80% of the absolute maximum
rating of IF(AV) and that the worst-case junction temperature, Tj, be kept below 120. When using
this device,
allow margins, referring to the Ta(max)-IF(AV) curve.
IFSM:This rating specifies peak non-repetitive forward surge current. This only applies to an abnormal
operation, which seldom occurs during the lifespan of a device.
Tj: Derate device parameters in proportion to this rating in order to ensure high reliability.
We recommend that the junction temperature (Tj) of a device be kept below 120.
(3) Thermal resistance (junction-to-ambient) varies with the mounting conditions of a device on a circuit
board. An appropriate thermal resistance value should be used, considering the heat sink, circuit board
design and soldering land size.
(4) For other design considerations, see the Rectifiers databook or the Toshiba Semiconductor website.
3 2014-04-01
Rev.2.0










Скачать PDF:

[ CMS20I30A.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
CMS20I30ASchottky Barrier DiodeToshiba
Toshiba

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск