|
|
Datasheet SA555 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | SA555 | xx555 Precision Timers (Rev. I) |  Texas Instruments | data |
| 2 | SA555 | Timer INTEGRATED CIRCUITS
NE/SA/SE555/SE555C Timer
Product data Supersedes data of 1994 Aug 31
Philips Semiconductors
2003 Feb 14
Philips Semiconductors
Timer
Product data
NE/SA/SE555/SE555C
DESCRIPTION
The 555 monolithic timing circuit is a highly stable controller capable of producing accurate time |  Philips | data |
| 3 | SA555 | Single Timer www.fairchildsemi.com
LM555/NE555/SA555
Single Timer
Features
• • • • • High Current Drive Capability (200mA) Adjustable Duty Cycle Temperature Stability of 0.005%/°C Timing From µSec to Hours Turn off Time Less Than 2µSec
Description
The LM555/NE555/SA555 is a highly stable controlle |  Fairchild Semiconductor | data |
| 4 | SA555 | GENERAL PURPOSE SINGLE BIPOLAR TIMERS NE555 SA555 - SE555
General-purpose single bipolar timers
Features
■ Low turn-off time
■ Maximum operating frequency greater than 500 kHz
■ Timing from microseconds to hours
■ Operates in both astable and monostable modes
■ Output can source or sink up to 200 mA
■ Adjustable duty cycle
|  STMicroelectronics | data |
| 5 | SA555 | PRECISION TIMERS NE555/SA555/NA555
PRECISION TIMERS Description
These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the timedelay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable |  Diodes | data |
SA5 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | SA5.0 | TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR Dc Components tvs-diode | | |
| 2 | SA5.0 | GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power) SA5.0 THRU SA170CA
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power
FEATURES l l l l l l l Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated chip junction 500W Peak Pulse Power capability on 10/10  Pan Jit International tvs-diode | | |
| 3 | SA5.0 | 500W TRANSIENT VOLTAGE SUPPRESSORS Won-Top Electronics tvs-diode | | |
| 4 | SA5.0 | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR SA5.0 THRU SA170CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to 170 Volts
DO-204AC
Peak Pulse Power - 500 Watts
FEATURES
0.034 (0.86) 1.0 (25.4) MIN. 0.028 (0.71) DIA.
0.300 (7.6) 0.230 (5.8)
0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN.
♦ Plastic package has Underwrite  General Semiconductor tvs-diode | | |
| 5 | SA5.0 | 500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS SA5.0
THRU
SA180CA
500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
VOLTAGE RANGE
5.0 to 180 Volts
FEATURES
* 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1�  Bytes tvs-diode | | |
| 6 | SA5.0 | Diode TVS (Transient Voltage Suppressor) SA5.0 - SA170A
VBR : 6.8 - 200 Volts PPK : 500 Watts
FEATURES :
* 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V
TRANSIENT VOLTAGE SUPPRESSOR
DO - 41
 EIC discrete tvs-diode | | |
| 7 | SA5.0 | Transient Voltage Suppressor Diodes SA SERIES
Features
Transient Voltage Suppressor Diodes
Voltage Range 5.0 to 170 Volts 500 Watts Peak Power 1.0 Watt Steady State
DO-15
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 500W surge capability at 10 X 10us waveform, duty cycle: 0.01% Excellent clamping ca  Taiwan Semiconductor diode | |
| Esta página es del resultado de búsqueda del SA555. Si pulsa el resultado de búsqueda de SA555 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |