DataSheet26.com

даташит AD5422 PDF электронных компонентов


AD5422 - Analog Devices - (AD5412 / AD5422) Current Source & Voltage Output DAC

Номер произв AD5422
Описание (AD5412 / AD5422) Current Source & Voltage Output DAC
Производители Analog Devices
логотип Analog Devices логотип 
предварительный просмотр
1Page
		

No Preview Available !

AD5422 Даташит, Описание, Даташиты
Data Sheet
Single Channel, 12-/16-Bit, Serial Input, Current
Source and Voltage Output DACs, HART Connectivity
AD5412/AD5422
FEATURES
12-/16-bit resolution and monotonicity
Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA, or
0 mA to 24 mA
±0.01% FSR typical total unadjusted error (TUE)
±3 ppm FSR/°C output drift
Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V
10% overrange
±0.01% FSR typical TUE
±2 ppm FSR/°C output drift
Flexible serial digital interface
On-chip output fault detection
On-chip reference: 10 ppm/°C maximum
Optional regulated DVCC output
Asynchronous clear function
Power supply range
AVDD: 10.8 V to 40 V
AVSS: −26.4 V to −3 V/0 V
Current loop compliance voltage: AVDD – 2.5 V
Temperature range: −40°C to +105°C
TSSOP and LFCSP packages
APPLICATIONS
Process controls
Actuator controls
PLC
HART network connectivity (LFCSP package only)
GENERAL DESCRIPTION
The AD5412/AD5422 are low cost, precision, fully integrated
12-/16-bit digital-to-analog converters (DAC) offering a pro-
grammable current source and programmable voltage output
designed to meet the requirements of industrial process control
applications.
The output current range is programmable at 4 mA to 20 mA,
0 mA to 20 mA, or an overrange function of 0 mA to 24 mA.
The LFCSP version of this product has a CAP2 pin so that the
HART signals can be coupled onto the current output of the
AD5412/AD5422.
Voltage output is provided from a separate pin that can be
configured to provide 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V
output ranges; an overrange of 10% is available on all ranges.
Analog outputs are short and open-circuit protected and can
drive capacitive loads of 1 µF.
The device operates with an AVDD power supply range from 10.8 V
to 40 V. Current loop compliance voltage is 0 V to AVDD − 2.5 V.
The flexible serial interface is SPI- and MICROWIRE™-compatible
and can be operated in 3-wire mode to minimize the digital
isolation required in isolated applications.
The device also includes a power-on-reset function, ensuring
that the device powers up in a known state. The part also includes
an asynchronous clear pin (CLEAR) that sets the outputs to
zero-scale/midscale voltage output or the low end of the
selected current range.
The total output error is typically ±0.01% in current mode and
±0.01% in voltage mode.
Table 1. Pin-Compatible Devices
Part No. Description
AD5410 Single channel, 12-bit, serial input current source DAC
AD5420 Single channel, 16-bit, serial input current source DAC
COMPANION PRODUCTS
HART Modem: AD5700, AD5700-1
Rev. M
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2009–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
--------------------------------------------

No Preview Available !

AD5422 Даташит, Описание, Даташиты
AD5412/AD5422
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Companion Products ....................................................................... 1
Revision History ............................................................................... 3
Functional Block Diagram .............................................................. 4
Specifications..................................................................................... 5
AC Performance Characteristics .............................................. 10
Timing Characteristics .............................................................. 10
Absolute Maximum Ratings.......................................................... 13
ESD Caution................................................................................ 13
Pin Configurations and Function Descriptions ......................... 14
Typical Performance Characteristics ........................................... 16
General......................................................................................... 16
Voltage Output............................................................................ 18
Current Output ........................................................................... 23
Terminology .................................................................................... 27
Theory of Operation ...................................................................... 29
Architecture................................................................................. 29
Serial Interface ............................................................................ 30
Power-On State ........................................................................... 31
Data Register ............................................................................... 33
Control Register.......................................................................... 33
Reset Register.............................................................................. 34
Status Register............................................................................. 34
AD5412/AD5422 Features ............................................................ 35
Data Sheet
Fault Alert.................................................................................... 35
Voltage Output Short Circuit Protection ................................ 35
Voltage Output Overrange ........................................................ 35
Voltage Output Force-Sense ..................................................... 35
Asynchronous Clear (CLEAR) ................................................. 35
Internal Reference ...................................................................... 35
External Current Setting Resistor ............................................ 35
Digital Power Supply.................................................................. 36
External Boost Function............................................................ 36
External Compensation Capacitor........................................... 36
HART Communication............................................................. 36
Digital Slew Rate Control.......................................................... 36
IOUT Filtering Capacitors (LFCSP Package)............................. 37
Applications Information .............................................................. 39
Voltage and Current Output Ranges on the Same Terminal 39
Driving Inductive Loads............................................................ 39
Transient Voltage Protection .................................................... 39
Galvanically Isolated Interface ................................................. 39
Microprocessor Interfacing....................................................... 39
Layout Guidelines....................................................................... 40
Thermal and Supply Considerations ....................................... 40
Industrial Analog Output Module ........................................... 41
Industrial HART Capable Analog Output Application ........ 41
Outline Dimensions ....................................................................... 43
Ordering Guide .......................................................................... 44
Rev. M | Page 2 of 44
--------------------------------------------

No Preview Available !

AD5422 Даташит, Описание, Даташиты
Data Sheet
REVISION HISTORY
7/2016—Rev. L to Rev. M
Changed −40°C to +85°C to −40°C to +105°C and CP-40-1 to
CP-40-9........................................................................... Throughout
Changes to Table 2 ............................................................................5
Added Table 3; Renumbered Sequentially .....................................9
Changes to Figure 6.........................................................................14
Changes to Thermal and Supply Conditions Section ................40
Updated Outline Dimensions........................................................43
Changes to Ordering Guide...........................................................44
7/2015—Rev. K to Rev. L
Change to IOUT to GND Parameter, Table 5 .................................11
Change to Voltage and Current Output Ranges on the Same
Terminal Section .............................................................................37
3/2015—Rev. J to Rev. K
Changes to Table 4 ............................................................................9
Changes to Table 6 ..........................................................................13
Changes to Power-On State Section .............................................29
10/2014—Rev. I to Rev. J
Changes to Power-On State Section .............................................29
Changes to Table 25 ........................................................................39
10/2013—Rev. H to Rev. I
Added Figure 34 and Figure 35; Renumbered Sequentially......18
Changes to Figure 78 ......................................................................37
Changes to Industrial Analog Output Module Section .............39
Changes to Industrial HART Capable Analog Output
Application Section.........................................................................39
6/2013—Rev. G to Rev. H
Change to REFOUT Pin, Table 6 ..................................................12
Changes to Voltage and Current Output Ranges on the Same
Terminal Section and Figure 75 ....................................................36
3/2013—Rev. F to Rev. G
Changed TSSOP_EP θJA from 42°C/W to 35°C/W, Changed
LFCSP θJA from 28°C/W to 33°C/W, and Added Endnote 2.....11
Added Figure 67 ..............................................................................30
Changes to REXT Description; Table 15......................................31
Changes to Table 21 ........................................................................33
Changes to Thermal and Supply Considerations Section .........38
Changes to Table 25 ........................................................................39
7/2012—Rev. E to Rev. F
Updated Outline Dimensions........................................................40
Changes to Ordering Guide...........................................................40
AD5412/AD5422
5/2012—Rev. D to Rev. E
Reorganized Layout ........................................................... Universal
Changes to Product Title..................................................................1
Changes to Features Section, Applications Section, and General
Description Section; Added Companion Products Section.............1
Changes to Figure 1 ..........................................................................3
Change to Offset Error Temperature Coefficient (TC)
Parameter, Table 1 .............................................................................4
Changes to Table 6 ..........................................................................12
Changes to Power-On State Section .............................................29
Added HART Communication Section and Figure 68,
Renumbered Sequentially ..............................................................33
Added Voltage and Current Output Ranges on the Same
Terminal Section and Figure 74 ....................................................36
Added Industrial HART Capable Analog Output Application
Section ..............................................................................................38
Added Figure 79 ..............................................................................39
11/2011—Rev. C to Rev. D
Changes to Table 15 ........................................................................29
3/2010—Rev. B to Rev. C
Changes to AVSS to GND Parameter in Table 5.........................10
2/2010—Rev. A to Rev. B
Changes to Thermal and Supply Considerations Section and
Table 25.............................................................................................36
8/2009—Rev. 0 to Rev. A
Changes to Table 2 ............................................................................4
Changes to Table 3 ............................................................................7
Changes to Introduction to Table 4 ................................................8
Changes to Introduction to Table 5 and to Table 5 ....................10
Changes to Pin Configurations and Function Descriptions
Section, Added Figure 6, Renumbered Subsequent Figures .....11
Changes to Theory of Operation Section ....................................26
Changes to Architecture Section...................................................26
Changes to AD5412/AD5422 Features Section ..........................31
Added IOUT Filtering Capacitors (LFCSP Package) Section,
Including Figure 69 to Figure 72 and Table 24............................33
Changes to Thermal and Supply Considerations Section .........36
Updated Outline Dimensions........................................................38
Changes to Ordering Guide...........................................................39
5/2009—Revision 0: Initial Version
Rev. M | Page 3 of 44
--------------------------------------------





Всего страниц 30 Pages
Скачать PDF[ AD5422.PDF Даташит ]

Ссылка Поделиться

Related Datasheets

Номер в каталогеОписаниеПроизводители
AD542  AD542 Даташит - Analog DevicesHigh Performance/ BiFET Operational AmplifiersAnalog Devices
Analog Devices
AD5420  AD5420 Даташит - Analog DevicesCurrent Source DACAnalog Devices
Analog Devices
AD5421  AD5421 Даташит - Analog Devices4mA to 20mA DACAnalog Devices
Analog Devices
AD5422  AD5422 Даташит - Analog Devices(AD5412 / AD5422) Current Source & Voltage Output DACAnalog Devices
Analog Devices
AD5424  AD5424 Даташит - Analog Devices(AD5424 - AD5547) High Bandwidth Multiplying DACsAnalog Devices
Analog Devices
AD5425  AD5425 Даташит - Analog DevicesHigh Bandwidth Multiplying DACAnalog Devices
Analog Devices


Номер в каталоге Описание Производители
157UD2

Dual op amp

ETC 1
ETC 1
6MBP200RA-060

Intelligent Power Module

Fuji Electric
Fuji Electric
ADF41020

18 GHz Microwave PLL Synthesizer

Analog Devices
Analog Devices
AN-SY6280

Low Loss Power Distribution Switch

Silergy
Silergy
AP6354

2x2 WiFi + Bluetooth4.1 Module

AMPAK
AMPAK

Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z




DataSheet26.com    |    2017    |   Контакты    |    English